Square Link
Out of stock
Only %1 left
Square Link is available to buy in increments of 1
Front
1. Film ejection slot
2. Function button
3. Power button/LED
4. USB port cover
5. USB Type-C port
6. Reset button*1
Rear
7. Film door lock
8. Film door
*1 If the printer does not work properly, press the reset button to reset the printer.
| Recording method | 3-color exposure with OLED |
| Film used | FUJIFILM instax™ SQUARE instant film (sold separately) |
| Number of films | 10 films/pack |
| Image size | 62 mm × 62 mm |
| Exposure pixel count | 800 × 800 dots |
| Exposure resolution | 12.5 dots/mm (318 dpi, 80 µm dot pitch) |
| Exposure gradation | RGB gradation of 256 colors |
| Interface | Bluetooth Ver. 4.2 (BLE) |
| Printable image format | JPEG, PNG, HEIF, DNG |
| Printing time | Image recording - photo output (fed out): Approximately 12 sec. |
| Possible number of printed images | Approximately 100 (from full charge; number of prints depends on usage conditions) |
| Power supply | Lithium ion battery (internal type: not removable) |
| Charging time | Approximately 80 to 120 minutes (depending upon environment temperature at time of charging) |
| Power consumption | Approximately 3 W |
| Operating environment | Temperature: +5 °C to +40 °C Humidity: 20% to 80% (no condensation) |
| Main unit dimensions | 105 mm × 37.5 mm × 127.5 mm (excluding projecting parts) |
| Main unit mass Approximately | 236 g (excluding film pack) |
| Supplied accessory | USB cable ( Type-C, Length: 30 cm ) |
| Rental | No |
|---|