Wide Link
SGD 269.00
In stock
Only %1 left
Wide Link is available to buy in increments of 1
Front
1. Film ejection slot
2. Power button/LED
3. Strap holes
Bottom
4. Reset button*1
5. Micro USB port
Rear
6. Film door lock
7. Film door
*1 If the printer does not work properly, press the reset button to reset the printer.
Specifications
| Recording method | 3-color exposure with OLED |
| Film used | FUJIFILM instax™ WIDE Instant Film (sold separately) |
| Number of films | 10 films/pack |
| Image size | 62 mm × 99 mm |
| Supported image size | 800 × 1260 dots |
| Printing resolution | 12.5 dots/mm (318 dpi, 80 µm dot pitch) |
| Printing levels | 256 levels per color (RGB) |
| Interface | Standard compliance: Bluetooth Ver. 4.2 (BLE) |
| Supported image format | JPEG, PNG, HEIF, DNG |
| Printing time | Image recording - photo output (fed out): Approximately 12 sec. |
| Approximate printing capacity |
Approximately 100 prints (from full charge)
* The number of prints depends on the usage conditions. |
| Power supply | Lithium ion battery (internal type: not removable) |
| Charging time | Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level) |
| Power consumption | Approximately 3 W |
| Operating environment | Temperature: +5 °C to +40 °C Humidity: 20% to 80% (no condensation) |
| Main unit dimensions | 139 mm × 127.5 mm × 33.7 mm (excluding projecting parts) |
| Main unit mass | Approximately 340 g (excluding film pack) |
| Supplied accessory | USB cable (BOD700-101, Length: 30 cm) , Stand (1) , Strap (1) |
| Rental | No |
|---|